Tool Holder is a tool that is a mechanical spindle and knife and other attachment tool connectors. The main standards are BT, SK, CAT, BBT, HSK and other specifications. A standard for generally used, SK (DIN6987) German standard. Traditional knife handle, with ER, powerful type, side fixing type, plane milling cutter, drilling chip, Mo's cone handle;There are hydraulic Tool Holder, Shrinkfit Tool Holder, PG (cold) type.
As an important "bridge" of connecting machine tools and blade, Tool Holder is related to the advantages and disadvantages of processing accuracy, blade life, and processing efficiency, and ultimately affect the quality and processing cost of processing.
01
High Quality
100%test before the factory to ensure product quality
02
Advanced Equipment
Imported machine tools and detection equipment to ensure that the quality of each product passes through
03
Professional Team
More than ten years of production experience, with professional technical teams and after -sales service
04
Custom Service
The product type is rich, the inventory is sufficient, and the one -stop can satisfy your diversity
Introduction tool holder series
CNC Machine Tool Accessories manufacturer
BT series tool holder
The BT tool handle is made of titanium alloy 20CrMnTi, which is wear-resistant and durable, has high precision, good dynamic balancing performance and strong stability. Mainly used for tool holder and tool clamping in drilling, milling, reaming, tapping and grinding
HSK series tool holder
HSK tool holders are available in various specifications such as type A, type B, type C, type D, type E, type F, etc. HSK toolholders can improve the rigidity and stability of the system and product accuracy during high-speed machining, and shorten the time of tool replacement. They play an important role in high-speed machining and are widely used in aerospace, automotive, precision mold and other manufacturing industries. in industry.
SK series tool holder
SK tool holder dynamic balance design, high speed and stability. Vacuum quenching, overall finishing, high concentricity, taper 7:24. Deep thread, high-speed locking, internal and external molding, stable precision. Equipped with milling cutter chuck with strong clamping force.
NT series tool holder
NT tool holders were commonly used in ordinary manual broaching machine tools in the past. The NT tool holder has internal threads at the rear end of its 7:24 taper, and is connected to the machine tool's threaded tie rod to tighten the tool holder. The BT tool holder has an internal thread at the rear end of the 7:24 taper, which is the upper pull head. The pull head is tightened by the broach claw in the machine tool spindle. That is to say, apart from the structural dimensions, the NT tool holder is tightened and loosened by the rotating spindle rod. NTtool Holder is widely used in electric locomotives, machine tools, automated instruments, engineering installation robotic arms, etc.
Tool Holder Advantage
Complete specifications, one-stop shopping
High quality material selection
Materials superior to peer standards, with better hardness and toughness
Shock-resistant and wear-resistant
Quenching and hardening, high hardness, strong fatigue resistance and good wear resistance, can withstand certain impact and load
High precision and good dynamic balance
Body accuracy ≤0.005mm, high concentricity, preset dynamic balance can reach 25000-30000RPM
Overall fine grinding
Precision can still be ensured at high speeds and the overall fine grinding
industry applications
For CNC machine tools
For precision milling and precision engraving on CNC machines
Auto parts production
Widely used in the automotive industry，For example, the production of automobile engines and other accessories
Mechanical processing
Processing of mechanical parts and metal products
3C industry
Production of mobile phones, computers, cameras and other electronic products
Daily maintenance of Tool Holder
Clean all accessories and spare parts, tool holders and spindles regularly, and be sure to apply a layer of oil to prevent oxidation when not in use.
Tool Holder must be stored in a clean, dry place.
Regularly check the wear of the tool holder, such as whether there are traces of fretting corrosion on the tool holder; also regularly check whether all accessories and spare parts such as bushings, spindle rivets, nuts, etc. need to be replaced.
Standardize operating procedures and use specific installation and removal equipment. Follow the tool's instructions for use with the handle.
Clamping cannot be done blindly without a torque screw wrench, and when twisting screws, do not exceed their given torque limits.
The recommended number of screw revolutions for the hydraulic clamping system must not be exceeded. Regularly regulate the pressure of the hydraulic chuck with calibrated gauges.
During use of the tool holder, do not allow the clamp to overheat.
When using different types of tool holders, pay attention to the maximum rotation speed and working temperature of each type of tool holder, and the maximum rotation speed and maximum working temperature cannot be exceeded.
Our Company
Professional，Focused,Attentived
why choose our products
Dezhou Newrgy Machinery Co., Ltd. is a professional enterprise specializing in the design, manufacturing and sales of CNC tool systems and clamping systems. It includes - tool system: BT tool holder, HSK tool holder, DIN69871 SK tool holder, CAT tool holder, NT tool holder, Additionally we also make other accessories as precision vises, pull studs, clamping nuts, spanners, etc. Products are exported to Europe, America, East Asia, Southeast Asia, and have won the trust of customers.
We fully develop domestic and international business and has independent import and export licenses, which can guarantee the products quality. While ensuring high-quality service to customers, we try our best to persevere in quality control and keep improving our service standards. We will persist in innovation, promote the development of the industry, strive to enhance market value, move Made in China to Create in China.
our Service
OEM service
We accept custom drawings and processing services from customers. We will try our best to help you design and put into products any customized personal needs you have.
Professional sales team
Well-trained and experienced staffs to answer all your enquires in fluent English.Products suitable for you can be recommended based on your needs, and your inquiries about our products or prices will be responded to within 24 hours.
Quality Qssurance
There is strict quality supervision during the production process, and 100% of the products are inspected to ensure that you get high-quality products.
After-sales service
If you have any problems with the product, you can contact our sales staff at any time. We have professional technical staff to provide you with help and support
FAQ
01. Are you a factory or a trading company?
02. Can you provide non-standard products?
03.What are the advantages of your company?
04.Why should I choose your product?
05.Are there other good services your company can provide?
06.How do we ensure quality?
You can contact us through our website（https://www.newrgytools.com/） and our professional sales staff will respond to your inquiry within 24 hours
Our address
North side of the middle section of Jinde Street, Pingyuan County Economic Development Zone, Dezhou City, Shandong Province
Phone Number
+86 15006512729
cnctools1@163.com
We're well-known as one of the leading tool holder manufacturers and suppliers in China. Please feel free to wholesale high quality tool holder at competitive price from our factory. For more information, contact us now.
C20 Straight Collet, BT40 Tapping Collet Chuck, Hsk63 Fmb tool Holder