1. Material: 20CrMnTi Surface Hardness: 52-55HRC
Heart Hardness:40-45HRC Precision:0.005mm
2. ER straight shank extension rod, the shank is longer, suitable for deep hole processing.
Our Tool Holder BT40 ER32, magnetically actuated tool holder, BT40 ER Tool Holders has a high reputation in domestic and foreign markets for its fine design and high quality. We can provide customers with a full range of high-torque tool holder solutions and professional services. In the future, our company will continue to overcome difficulties, tap potential and constantly update with determination. Integrity is our most important intangible asset, so we insist on winning customers with integrity. Fulfilling social responsibility is an important strategic initiative for enterprises to adapt to the new normal of economic development and enhance their competitiveness. At our company, we work tirelessly to ensure that our customers receive the best possible service and products. As the saying goes, "Product is character, quality is personality, and service is responsibility", the company has been moving in this direction! For many years, we have always taken the standard as the basic quality requirement of the brand. We carefully manufacture each product with the spirit of craftsmanship.
-
BBT40 Tool HolderWhat are the "BBT" series toolholders? The BBT series toolholders comply with the BT MAS 403 standard. These are taper contact toolholders. Since the spindle taper, spindle face and...read more
-
BT-ER Collet Chuck Tool Holder1. Adopt carburizing and quenching process, high surface hardness, strong fatigue resistance and high wear resistance.read more
2. After the core is quenched, the toughness of low carbon steel is... -
DIN69871 Standard SK40 Tool Holder1.DIN69871 Standard SK40 Tool Holder dynamic balance design, high speed and stability. 2. Vacuum quenching, overall finishing, high concentricity, taper 7:24. 3. Deep thread, high-speed locking,...read more
-
BT40 ER32 Tool Holder for CNC Lathe1.Excellent material:BT40 ER32 Tool Holder made of 20CrMnTi material, extending product service life and stable performance. 2.Quenching treatment:After high-frequency quenching treatment, it has...read more
-
High Quality DIN69871 SK40 SK50 Tool Holder1.High Quality DIN69871 SK40 SK50 Tool Holder selected 20CrMnTi high-speed steel:Advanced vacuum quenching furnace, which can achieve carbon nitrogen co infiltration, improve the hardness of the...read more
-
HSK63A ER Tool HolderHSK63A ER Tool Holder series is made of high-quality materials. After heat treatment, it has good elasticity and wear resistance, high precision and stable performance. Mainly used for tool holder...read more
-
High Precision CAT40 CAT50 Tool HolderCAT40 CAT50 Tool Holder is made of 20CrMnTi high-quality steel. The runout of the tool holder body is within 0.003mm. The product is fully inspected and has a bright appearance. The surface has...read more
-
NT40 Tool HolderNT40 Tool Holder is widely used in CNC milling machines and milling processing centers to ensure that each product conforms to the taper 7:24 and the outer taper conforms to the individual project...read more
-
HSK63A ER32 Tool Holder1.HSK63A ER32 Tool Holder is made of high-quality 20CrMnTi carburized steel, which has strong wear resistance. 2. Calibrated by a dynamic balancer, the dynamic balance is high-precision. 3. No...read more
-
NT30 ER32 Collet Chuck1. NT30 ER30 Collet Chuck is made of high-quality elastic steel, which has a long service life.read more
2. 7:24 tapered collet chuck: NT25, NT30, NT40, NT50 collet chuck.
3. Applicable... -
MT3 ER32 Morse Taper Collet Chuck1.Material: MT3 ER32 Morse Taper Collet Chuck using high-quality alloy structural steel 40Cr, heat treatment hardness HRC45~48;read more
2.This product can widely replace ordinary wrench type...
The price you offered is beyond our control, and the quality is also very good.
Authenticity is your standard. We are here to wish your company better and better!
I've been using the product for a while and it really works!
Good seller, I have a pleasant experience of cooperation.
Working with you has solved many of our problems and you are a very reliable and trustworthy company!
Before the cooperation, we visited this factory and also saw their professional attitude. Reasonable price and considerate service make us choose to continue cooperation in the future.
It is our next goal to further expand the scale and efficiency of ansi metric thread pull stud, large size vise, insertion pull stud export in the situation of economic globalization. We're well-known as one of the leading high-torque tool holder manufacturers and suppliers in China. Please feel free to wholesale high quality high-torque tool holder at competitive price from our factory. For more information, contact us now.
