Tapping chuck is a machine tool fixture for internal thread processing. It is a multi-purpose tool series for clamping taps. It has a wide variety of varieties and is one of the more common fixtures in machining.
Dezhou Newrgy Machinery Co., Ltd. has been committed to achieving economy through precision and improving efficiency through quality.
Dezhou Newrgy Machinery Co., Ltd. has more than 10 years of professional experience in the production of spring chucks. The raw materials are ordered in large quantities, and the performance is stable and uniform. Self-built salt bath heat treatment workshop, three salt bath heat treatment, can provide auxiliary design of chucks and peripheral accessories, one-stop procurement.
As a professional spring chuck manufacturer, Dezhou Newrgy Machinery Co., Ltd. will share with you the structure, use and maintenance methods of tapping chucks:
The main components of the tapping chuck are: 1. Taper shank 2. Morse sleeve 3. Connecting rod 4. Tap sleeve
1. When installing, first clean the chuck cone and the machine tool spindle, then install the body cone on the spindle, and tap the end face of the body with a rubber hammer or a wooden hammer to ensure tightness and firmness or tighten it with a connecting rod.
2. Select the corresponding sleeve according to the processing needs, clean it, put it into the inner hole of the main body, gently push the main body slide cap, so that the sleeve is placed in the square hole in the main body, and then clamp the corresponding tool on the sleeve. After clamping, it can be processed and used.
3. If the tapping function is used, remember to loosen the nut first. During processing, tighten the nut according to the needs of different torque sizes of the tap (the nut is not easy to be too tight) to prevent the tap from sliding.
4. When putting the tap into the tap sleeve, pay attention to placing the square handle into the square hole in the collet to increase the torque.